Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

65 Watt Equivalent, 9.5 Watt, 120 Volt NON-DIMMABLE 25,000-Hr 2700K Warm White LED BR30 Bulb

SKU: 429498 | Ordering Code: 9.5BR30/COREPRO/F90 2700

Sorry, this product is not available to purchase.

Product Details

Brand

Philips

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
9.5 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
BR-30

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Medium (E26)

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
90

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
3.75

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
5.1

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
25,000

Brightness (Lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
650

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
81

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
2700K

Damp Location

Suitable for an exterior or interior location that is subject to condensation of moisture in, on or adjacent to electrical equipment
 
Damp Location
Yes

Warranty

2 year limited

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Frosted

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Warm White
Description
 
Reviews
 
Q & A

Philips CorePro Brand NON-DIMMABLE 9.5 Watt lamp generates as much light as many 65 Watt BR30 incandescent lamps. 

  • Uses AirFlux Technology which provides optimal thermal efficiency in a sleek, lightweight design
  • Perfect to use anywhere you are using a 65 Watt BR30 incandescent lamp

  • No lead or mercury means easy and environmentally safe disposal

  • 650 Lumens initial light output is comparable to most 65 Watt incandescent lamps, while saving 55.5 Watts in electricity

  • VERY long life - rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new

CHECK PRODUCT FIT BEFORE INVESTING IN MANY - Product May Not Fit in Your Fixture.  Also, NOT RECOMMENDED for use in enclosed fixtures because heat buildup can shorten life.  DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb.

REVIEW SNAPSHOT®

by PowerReviews
Philips65 Watt Equivalent, 9.5 Watt, 120 Volt NON-DIMMABLE 25,000-Hr 2700K Warm White LED BR30 Bulb
 
5.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

 
5.0

Like Daylight

By TJ

From eastern Pennsylvania

About Me Value Oriented

Verified Buyer

Pros

  • Bright
  • Runs Cool

Cons

    Best Uses

      Comments about Philips 65 Watt Equivalent, 9.5 Watt, 120 Volt NON-DIMMABLE 25,000-Hr 2700K Warm White LED BR30 Bulb:

      The light is white, unlike the yellowish light of the halogen bulbs that these replaced. One week's use does not reveal much about longevity or savings. There is less heat generated, a good thing in these extraordinary summer temperatures. Odd to say, but I am waiting for the remaining halogen bulbs burn out to justify replacing them. The cost was about 4 times that of the halogen par 30 bulbs, but the quantity and quality of light are worth the price.

      • Primary use:
      • Personal

      Displaying review 1

      Back to top

      Do you have questions about this product?

      get answers from real customers and in-house experts with AnswerBox.

      4 Questions | 4 Answers
      Displaying questions 1-4
      • Q:

        What are the minimum / maximum operating temperatures for this bulb? Will it perform equally in room and outdoor (winter) temperatures?
        Asked on 3/29/2014 by Scott from Strongsville, OH

        1 answer

        • Bulbs.com LS1 Certified Lighting Specialist

          A:

          Philips LED lamp operating temperature is -40 to 120 F. Yes, it will perform in both settings. LEDs do perform well in colder temperatures, providing they are not directly exposed to weather elements and not in a fully enclosed fixture. Please contact Customer Service at 888-455-2800 for further assistance.

          Answered on 4/3/2014 by Anonymous
      • Q:

        What does it mean . . ."Do not use in enclosed fixture." What about in a recessed can in the ceiling?
        Asked on 3/10/2014 by TLC from Newtown, CT

        1 answer

        • Bulbs.com LS1 Certified Lighting Specialist

          A:

          Yes, this Philips BR30 can be used within recessed cans. It should not be used within a completely enclosed fixture such as a recessed can with a lens cover.

          Answered on 3/11/2014 by Anonymous
      • Q:

        Is this bulb dimmable.
        Asked on 3/6/2014 by abdul from NC

        1 answer

      • Q:

        Is this bulbs are UL listed
        Asked on 1/9/2014 by mike from ca

        1 answer

        • Bulbs.com LS1 Certified Lighting Specialist

          A:

          Yes, this Philips Lamp is UL listed.

          Answered on 1/10/2014 by Anonymous
      Displaying questions 1-4

      Do you have a question about this product? 

       
      BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.