Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

14 Watt, 120 Volt DIMMABLE 25,000-Hr LED BR30 Bulb - Similar to Halogen

SKU: LED14E26BR3030K | Ordering Code: LED14E26BR3030K

Sorry, this product is not available to purchase.

Product Details

Brand

TCP

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
14 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
BR-30

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Medium (E26)

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
120

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
3.8

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
5.4

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
25,000

Brightness (Lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
850

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
85

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3000K

Energy Star Qualified

Energy Star is a program created jointly by the U.S, Environmental Protection Agency and the U.S. Department of Energy to help people save money and protect the environment by using energy-efficient electronics and appliances. Energy Star-qualified devices use less energy without compromising functionality.
 
Energy Star Qualified
Yes

Warranty

5 years limited

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Frosted

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Soft White

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
Yes

Product Notes: Excessive or Continuous Heat Build-up will Drastically Reduce the Life of LED Products. Well Ventilated AND Open Fixtures Are Required for Proper Light Output and Product Life. DO NOT HOT-SWAP THIS BULB-Turn Off Power To Fixture Before Installation.

Description
 
Reviews
 
Q & A

TCP Brand DIMMABLE 14 Watt lamp generates as much light as many 75 Watt BR30 incandescent lamps. Can smoothly dim down to 10% power.

  • Perfect to use anywhere you are using a 75 Watt BR30 incandescent lamp

  • No lead or mercury means easy and environmentally safe disposal

  • 850 Lumens initial light output is comparable to most 75 Watt incandescent lamps, while saving 61 Watts in electricity

  • VERY long life - rated to still put out 70% as much light after 25,000 hours of operation as it does when brand new

  • Energy Star qualified

CHECK PRODUCT FIT BEFORE INVESTING IN MANY - Product May Not Fit in Your Fixture.  Also, NOT RECOMMENDED for use in enclosed fixtures because heat buildup can shorten life.  DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb.

REVIEW SNAPSHOT®

by PowerReviews
TCP14 Watt, 120 Volt DIMMABLE 25,000-Hr Warm White LED BR30 Bulb
 
4.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

(1 of 1 customers found this review helpful)

 
4.0

Great replacement for BR30 bulbs

By too many bulbs

From san diego, ca

About Me Quality Oriented

Verified Reviewer

Pros

  • Bright

Cons

    Best Uses

      Comments about TCP 14 Watt, 120 Volt DIMMABLE 25,000-Hr Warm White LED BR30 Bulb:

      Bought one to try, installed in kitchen. Actually provides a much better light than even a GE Reveal .... going to use to replace all the BR30s in house over time.

      Have not tested dimming yet.

      • Primary use:
      • Personal

      Displaying review 1

      Back to top

      Do you have questions about this product?

      get answers from real customers and in-house experts with AnswerBox.

      1 Question | 1 Answer
      Displaying question 1
      • Q:

        CAN THE BULB BE USED IN RECESSED FIXTURE?
        Asked on 8/23/2012 by joes from lawrence ny

        1 answer

        • Bulbs.com LS1 Certified Lighting Specialist

          A:

          LEDs are not recommended for use in enclosed fixtures. That being said, if there is proper ventilation within the recessed cans (maybe small holes for the heat build-up to be released) or if the cans are not insulated, then the LEDs should work just fine.

          Answered on 8/23/2012 by Anonymous
      Displaying question 1

      Do you have a question about this product? 

       
      BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.