Lutron Maestro Wireless Dimmer, 600 Watt/600 VA, Spec. Grade, Neutral Wire
SKU: MRF2-6ND-120-WH | Ordering
Sorry, this product is not available to purchase.
For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
The decorative finish of the item.
|1 year limited
Maximum Load (Watts)
Maximum Load (Watts)
The maximum power that a product can handle.
Lutron Maestro® Wireless 600 Watt/600 VA Incandescent/Halogen/Magnetic Low-Voltage (MLV), Spec. Grade, Neutral Wire Dimmer. Use this Maestro wireless dimmer for applications in which a local switch already exists and dimming is required.
Application: Incandescent/Halogen and magnetic low-voltage
- Digital dimmer with LEDs that indicate light level
- Incorporates advanced features such as fade on/fade off, long fade off and rapid full on
- Utilizes Lutron reliable Clear Connect RF technologh to communicate wirelessly with up to 9 transmitting devices (Radio Powr Savr sensors and/or Pico wireless controls)
Benefits - Dimming saves money and energy - for every percentage reduction in lighting levels, there is nearly an equal reduction in the energy usage of the dimmed light source. Ability to set high-end trim based on requirements. Button press programming to associate the control with Radio Powr Savr sensors and Pico wireless controls.
Requires a 1-gang U.S. wallbox, 3 1/2" deep recommended, 2 1/4" deep minimum. 100% factory tested. Many other colors available.
To get wireless capability with this dimmer you'll need to also purchase one of the four Lutron Pico® wireless controls. Can also work with Lutron ceiling/wall/corner/hallway mount occupancy/vacancy sensors. Call for details.
Wallplate not included. A screwless wallplate can be purchased separately. See Lutron # CW-1.
Please check with lamp manufactureer for compatibility with dimmable LED lamps.
To be installed by a licensed electrician.