Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

9 Watt, 120 Volt DIMMABLE 50,000-Hr LED PAR20 Bulb - Similar to Halogen

SKU: LED9E26P2030KNFL | Ordering Code: LED9E26P2030KNFL

Sorry, this product is not available to purchase.

Product Details

Brand

TCP

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
9 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
PAR-20

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Medium (E26)

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
25

Diameter (in)

Light bulbs: a measurement of a bulb's width taken at the widest point of the bulb. Fixtures: the measurement across the widest point of a circular fixture.
 
Diameter (in)
2.5

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
3.5

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50,000

Brightness (Lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
500

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
85

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3000K

Energy Star Qualified

Energy Star is a program created jointly by the U.S, Environmental Protection Agency and the U.S. Department of Energy to help people save money and protect the environment by using energy-efficient electronics and appliances. Energy Star-qualified devices use less energy without compromising functionality.
 
Energy Star Qualified
Yes

Center Beam Candle Power

Center Beam Candle Power(CBPC), or Maximum Beam Candle Power(MBCP), represents the intensity of delivered light that falls onto a surface area. Delivered light describes how much useful light a bulb can deliver to a task area and is the best and most relevant measurement for evaluating LEDs and for making accurate comparisons with conventional lighting. Evaluating an LED solely or primarily on the basis if its lumen output can underestimate or otherwise give a distorted picture of the LED's performance and suitability for a given task or application.
 
Center Beam Candle Power
1,900

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Bulb Finish

The surface finish of a bulb, which may affect the quality of the light emitted.
 
Bulb Finish
Clear

Bulb Color

The color of the light produced by a bulb
 
Bulb Color
Soft White

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
Yes

Product Notes: Excessive or Continuous Heat Build-up will Drastically Reduce the Life of LED Products. Well Ventilated AND Open Fixtures Are Required for Proper Light Output and Product Life. DO NOT HOT-SWAP THIS BULB-Turn Off Power To Fixture Before Installation.

Description
 
Reviews
 
Q & A

TCP Brand DIMMABLE 9 Watt narrow flood lamp generates as much light as many 50 Watt traditional halogen lamps. Can smoothly dim down to 5% power.

  • Perfect to use anywhere you are using a 50 Watt PAR20 halogen lamp

  • No lead or mercury means easy and environmentally safe disposal

  • 500 Lumens initial light output is comparable to most 50 Watt halogen lamps, while saving 41 Watts in electricity

  • VERY long life - rated to still put out 70% as much light after 50,000 hours of operation as it does when brand new

  • Energy Star Qualified

CHECK PRODUCT FIT BEFORE INVESTING IN MANY-Product May Not Fit in Your Fixture.  Also, NOT RECOMMENDED for use in enclosed fixtures because heat buildup can shorten life.  DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb.

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

2 Questions | 2 Answers
Displaying questions 1-2
  • Q:

    Can this product be used for outside lighting? I would like to use these bulbs to replace the bulbs in the up-lights on the outside of my house.
    Asked on 10/22/2012 by Cliff from Hot Springs, AR

    1 answer

    • Bulbs.com LS1 Certified Lighting Specialist

      A:

      TCP LEDs are only damp location rated, meaning that they should not be used outdoors. For your application, search for wet location rated LEDs.

      Answered on 10/24/2012 by Anonymous
  • Q:

    Specs say this isn't to be used in enclosed fixtures. Does that mean it isn't suitable for a recessed 4" can fixture? These are common cans, spaced across the ceiling, open on the bottom (no lenses). The upper end of the can will be in the attic, but covered by batt insulation.
    Asked on 3/15/2012 by Dave from Cape Coral, FL

    1 answer

    • CUSTOMER CARE

      A:

      The product can be used in recessed can fixtures. The fixture needs some ventilation. Otherwise heat will build up within the fixture and will affect the life and performance of the bulb.

      Answered on 3/16/2012 by Product Support from Bulbs.com
Displaying questions 1-2

Do you have a question about this product? 

 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.