Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

2.6 Watt, 120 Volt DIMMABLE LED R16 Warm White Reflector Style Wide Flood Bulb.

SKU: AE26R16WW60 | Ordering Code: AE26R16WW60

Sorry, this product is not available to purchase.

Product Details

Brand

Array Lighting

Energy Used

A rating, expressed in watts, to indicate the rate at which a lamp consumes energy. Also known as wattage value.
 
Energy Used
2.6 Watts

Volts

A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
 
Volts
120

Bulb Shape

The description of the general appearance of a lamp/bulb consists of a letter(s) followed by a number. The letter indicates the shape of the bulb and the number relates to the diameter of the bulb in eighths of an inch. For example, a common household bulb is the A-19. The bulb is "A" shape and the diameter would be nineteen 8ths of an inch, or 2 3/8".
 
Bulb Shape
PAR-16

Base

The end (or ends) of the lamp that fits into the socket.
 
Base
Medium (E26)

Beam Spread (°)

The width of a light beam, expressed in degrees. The beam spread is often part of the ordering code for reflector lamps. For example, a 50PAR30/HIR/NFL25 is a 50-watt PAR30 narrow flood lamp with a beam spread of 25 degrees.
 
Beam Spread (°)
60

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
2

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
2.5

Average Rated Life (hr)

A measurement of the average length of time, between first use and the point when 50% of the lamps tested have stopped functioning, , using an operating cycle of 3 hours on, 20 minutes off.
 
Average Rated Life (hr)
50,000

Brightness (Lumens)

A rating of the inital light output of a bulb, rated after 100 hrs of operation. Lumens are a measure of how much light falls on one square foot of area, one foot away from the light source.
 
Brightness (Lumens)
165

Finish

Light bulbs: the coating applied to the bulb causing light to be emitted in certain colors or color temperatures (see Color Temperature). Popular finishes include clear, frosted, colors (amber, blue, green, red, etc.) as well as color temperature designations ranging from warm white (2700K) to natural daylight (6500K). Fixtures: the decorative finish of the item.
 
Finish
Warm White

CRI

Color Rendering Index is an international system used to rate a lamp's ability to render object colors. The higher the CRI (based upon a 0-100 scale) the richer and more accurately colors generally appear. CRI differences among lamps are not usually visible to the eye unless the difference is more than 3-5 points.
 
CRI
82

Color Temperature (Kelvin)

An expression of the hue of the light emitted, measured in degrees Kelvin. Usually expressed by a four digit number followed by (k), such as 2700k. Higher temperatures indicate whiter, "cooler" colors, while lower temperatures indicate yellower, "warmer" colors. Some common Kelvin temperature benchmarks are 2700k (warm white), 3500k (neutral white), 4100k (cool white), 5000k (bright white), and 6500k (daylight).
 
Color Temperature (Kelvin)
3000K

Bulb Technology

The technology implemented by the bulb, e.g. incandescent, halogen, LED
 
Bulb Technology
LED

Dimmable

Indicates whether a bulb can be dimmed in conjunction with a suitable dimmer control.
 
Dimmable
Yes

Product Notes: Excessive or Continuous Heat Build-up will Drastically Reduce the Life of LED Products. Well Ventilated AND Open Fixtures Are Required for Proper Light Output and Product Life. DO NOT HOT-SWAP THIS BULB-Turn Off Power To Fixture Before Installation. If Your Fixture Already Has a Lens, Remove It (If Possible) for Best Optics and Heat Exchange. NOT DESIGNED FOR OUTDOOR USE NOR FOR USE IN WET LOCATIONS.

Description
 
Reviews
 
Q & A

Array Lighting Brand DIMMABLE 2.6 Watt lamp replaces R16 traditional incandescent lamps. Can smoothly dim down to 10% power.

  • Perfect to use anywhere you are using a 25 watt R16 incandescent lamp

  • 3000K "Warm White" color very closely resembles the incandescent it replaces

  • No lead or mercury means easy and environmentally safe disposal

  • 165 Lumens initial light output is comparable to many R16 incandescent lamps

  • VERY long life - rated to still put out 70% as much light after 50,000 hours of operation as it does when brand new

CHECK PRODUCT FIT BEFORE INVESTING IN MANY-Product May Not Fit in Your Fixture.  Also, NOT RECOMMENDED for use in enclosed fixtures because heat buildup can shorten life.  DO NOT "hot swap" this lamp.  Turn off fixture before replacing existing bulb.

REVIEW SNAPSHOT®

by PowerReviews
Array Lighting2.6 Watt, 120 Volt DIMMABLE LED R16 Warm White Reflector Style Wide Flood Bulb.
 
5.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

 
5.0

I like em!

By Edickent

From MD, USA

About Me Elec Engineer, Non-green tryin2do right, Quality Oriented

See all my reviews

Verified Reviewer

Pros

  • Bright
  • Long Life
  • Near Incandescent Color
  • Reduces Energy Costs
  • Runs Cool

Cons

  • Low-current dimmer prob

Best Uses

  • General Lighting
  • Spot Highlights

Comments about Array Lighting 2.6 Watt, 120 Volt DIMMABLE LED R16 Warm White Reflector Style Wide Flood Bulb.:

Replaced most of house's lights now, CFL's were a disappointment versus incandescent color, ambiance, and brightness... but gotta say I'm pretty happy with these LED's performance. Lights come on immediately (unlike CFL), light is closer in color to incandescent than any CFL I've tried yet, and these bulbs were actually BRIGHTER than I expected. Light-output was as-bright (or brighter) than R16-30W incandescents I replaced (perhaps a tad more white than original).

I've got a ton (30?) of 4" pot-lights in my house, most have down-baffles (diffusers) but I've got a few that are eyeballs. The 4" eyeballs are kind-of unique, in-that you can only use a 2.0"-diameter bulb (R16, PAR16), while the 4" baffles can handle an R20. These LEDs were a perfect replacement for my R16's in all of my eyeballs (though these LEDs are considerably shorter than the R16's, see attached pictures).

The only negative (which you can't really blame the bulb) is that my Eaton/Lutron 600W dimmers have too much leakage, and have trouble dimming one-or-two bulbs! The dimmers work fine In circuits of my house where I had 2-LED and 2-CFL, or 3-LEDs installed... but with only 1-or-2 of these LED bulbs installed, the dimmer leaked enough (when turned on) to continue lighting the LED bulbs at near full-brightness. It's not the bulb's fault that they're so energy-efficient, though... the dimmer-manufacturers never expected them to have no load! These LEDs dim perfectly (and probably over a greater light-range than the incandescents dimmed) when the dimmer is working properly.

I will be ordering more of these, maybe after a couple more paychecks!

  • Primary use:
  • Personal

Displaying review 1

Back to top

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

1 Question | 2 Answers
Displaying question 1
  • Q:

    What is the diameter of this bulb? My 4"-pots have eyeballs with an opening of just-over 2". Only the Bulbrite PAR16 has ever fit in this fixture. Also, how does the brightness of this LED compare to a 40W PAR16?
    Asked on 5/3/2011 by Mikey-E from MD

    2 answers

    • CUSTOMER CARE

      A:

      The diameter of this bulb is 2", same diameter as a PAR16 bulb. This bulb uses only 2.6 watts and can be used to replace up to a 35-watt halogen reflector bulb.

      Answered on 5/3/2011 by Product Support from Bulbs.com
    • A:

      Yes, 2.0". Light is as-bright (or brighter) than 30W R16, perhaps a tad more white than incandescent.

      Answered on 12/27/2011 by Edickent from MD, USA
Displaying question 1

Do you have a question about this product? 

 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.