Brand | Value Brand |
Volts
A measure of "electrical pressure" between two points. The voltage specification of an incandescent lamp is the electrical "pressure" required to drive it at its designed point. The "voltage" of a ballast (e.g. 120 V) refers to the line voltage coming from the power source and is connected to the ballast.
Volts | 120 |
Number of Lamps | 1 |
Ballast Type
Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
Ballast Type | Magnetic (S62) |
Battery | None |
Replacement Lamp | 70W Standard HPS Lamp w/ Medium Base (S62) |
Height (in)
For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
Height (in) | 9.5 |
Width (in)
For fixtures and ballasts, width is the measurement of the total depth of the product in inches.
Width (in) | 7 |
Length (in)
Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
Length (in) | 8.5 |
Finish
Light bulbs: the coating applied to the bulb causing light to be emitted in certain colors or color temperatures (see Color Temperature). Popular finishes include clear, frosted, colors (amber, blue, green, red, etc.) as well as color temperature designations ranging from warm white (2700K) to natural daylight (6500K). Fixtures: the decorative finish of the item.
Finish | Bronze |
Watts per Bulb | 70 |
Housing | Bronze Polyester Powder on die Cast Aluminum |
Mounting | Back Plate Knockouts Mount to Standard Recessed Electrical Boxes. Mounting plate also included. |
Bulb Type Supplied
Type of bulb supplied with the fixture
Bulb Type Supplied | High Pressure Sodium |
Installation Type
The way in which a fixture attaches to its relevant surface.
Installation Type | Flush |
Wet Location
Suitable for exterior or interior location in which uncontrolled liquid may drip, splash or flow on or against electrical equipment.
Wet Location | Yes |