Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

120 Volt Three Lamp F32T8 Electronic Ballast, Standard Model

SKU: B332I120RH-A000I | Ordering Code: B332I120RH-A000I

Sorry, this product is not available to purchase.

Product Details

Brand

Universal

Input Volts

120

Input Watts

52-86

Number of Lamps

2/3

Ballast Factor

The percentage of a lamp's rated lumen output that can be expected when operated on a specific commercially available ballast. For example, a ballast with a ballast factor of 0.93 will result in the lamps emitting 93% of their rated lumen output. A ballast with a lower ballast factor results in less light output and also generally consumes less power.
 
Ballast Factor
88-103%

Ballast Type

Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
 
Ballast Type
Electronic

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
1.2

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
1.7

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
9.5

Power Factor

90-98%

Total Harmonic Distortion (THD)

Total harmonic distortion, or THD, is the measure of how much a ballast can distort the waveform of that building’s power supply and interfere with other equipment. Electronic ballasts today are rated at less than 20 percent, 15 percent, or less than 10 percent THD. The magnetic ballast is rated in the 20 to 28 percent range. The lower the THD the better and more efficient the ballast, and the less likely it is to interfere with other electronic equipment.
 
Total Harmonic Distortion (THD)
<20-32%

Lamps by Wattage

2x31W, 2x32W, 2x40W, 3x17W, 3x24W, 3x25W, 3x31W, 3x32W

Ballast Lamp Type

The type of bulb the ballast can fire.
 
Ballast Lamp Type
T8

Product Notes: Dedicated voltage models used most often in pre-existing fixtures. Using Reduced Harmonics (.88 Ballast Factor) Standard Ballast Factor ballasts will provide consistent, efficient light. Typical Application: Industrial factory and warehouse space with basic, no-frills overhead lighting.

Description
 
Reviews
 
Q & A
Universal Brand Triad Standard Dedicated Voltage Instant Start Electronic Ballast Ignites Three F17T8, FB17T8, FB24T8, F25T8, FB025T8, F25T12, or Two or Three FB31T8, F32T8/ES, F32T8, FB32T8, or Two F40T8 Lamp(s) of 120 Voltage. LAMP(S) NOT INCLUDED. Common Offsets: Advance REL3P32SC and Howard E3/32IS-120.

REVIEW SNAPSHOT®

by PowerReviews
Universal120 Volt Three Lamp F32T8 Electronic Ballast, Standard Model
 
4.3

(based on 6 reviews)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to install (6)

Cons

    Best Uses

    • Repair or replacement (6)
      • Primary use:
      • Business (5)
      • Reviewer Profile:
      • Avid do-it-yourselfer (6)

    Reviewed by 6 customers

    Sort by

    Displaying reviews 1-6

    Back to top

     
    4.0

    Ballasts Work Well

    By Jim

    From WV

    About Me Avid Do-It-Yourselfer

    Verified Buyer

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Repair or replacement

      Comments about Universal 120 Volt Three Lamp F32T8 Electronic Ballast, Standard Model:

      Seems to work well for replacements. Have been putting them in for 2 years as replacements for original ballasts which seem to fail after about 5 years. Probably have replaced 25% of ours (about 2 dozen) and they seem to be doing fine.

      • Primary use:
      • Business
       
      5.0

      exact fit at the right price

      By Bert

      From Central Florida

      About Me Avid Do-It-Yourselfer

      Verified Buyer

      Pros

      • Easy To Install
      • No Problems

      Cons

      • No Performance Improvement
      • No Wire Nuts Included

      Best Uses

      • Repair or replacement

      Comments about Universal 120 Volt Three Lamp F32T8 Electronic Ballast, Standard Model:

      had to replace four light ballasts in an office building. All installed without any issues. These were exact model matches.To install, you have to cut the wires which means you will need some wire nuts to connect the wires. the wire is thin so I had to buy some correct size wire nuts. It would have been nice if the wire nuts were included, but they were inexpensive. Now I have a few left for the next time.

      • Primary use:
      • Business
       
      4.0

      Ballast Replacement

      By Jim

      From New Martinsville, West Virginia

      About Me Avid Do-It-Yourselfer

      See all my reviews

      Verified Buyer

      Pros

      • Easy To Install

      Cons

        Best Uses

        • Repair or replacement

        Comments about Universal 120 Volt Three Lamp F32T8 Electronic Ballast, Standard Model:

        Direct replacement - maintenance failed ballasts

        • Primary use:
        • Business
         
        5.0

        Great response and products

        By steel builder

        From Greeley Colorado

        About Me Avid Do-It-Yourselfer

        Verified Buyer

        Pros

        • Easy To Install

        Cons

          Best Uses

          • Repair or replacement

          Comments about Universal 120 Volt Three Lamp F32T8 Electronic Ballast, Standard Model:

          The ballast fit pertectly and all worked great. [...]. I am very well pleased.

          • Primary use:
          • Personal
           
          4.0

          Good ballast, works great!

          By Fireborne

          From Hubbarston, MA

          About Me Avid Do-It-Yourselfer

          See all my reviews

          Verified Buyer

          Pros

          • Easy To Install
          • Quite no hum

          Cons

            Best Uses

            • Repair or replacement

            Comments about Universal 120 Volt Three Lamp F32T8 Electronic Ballast, Standard Model:

            Replaced 4 dying ballasts, so far they are working perfect.

            • Primary use:
            • Business
             
            4.0

            Great stock item

            By Butch

            From Atlanta, GA

            About Me Avid Do-It-Yourselfer, Professional

            See all my reviews

            Verified Buyer

            Pros

            • Easy To Install
            • Fits Many applactions
            • Quality Construction

            Cons

              Best Uses

              • Repair or replacement

              Comments about Universal 120 Volt Three Lamp F32T8 Electronic Ballast, Standard Model:

              General Lighting in multiple fixtures
              Many uses for 1 ballast

              • Primary use:
              • Business

              Displaying reviews 1-6

              Back to top

               
              BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.