Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

120-277 Volt Two Lamp F96T12/HO ELECTRONIC Ballast

SKU: B295SRUNVHP000I | Ordering Code: B295SRUNVHP000I

Sorry, this product is not available to purchase.

Product Details

Brand

Universal

Input Volts

120-277

Input Watts

109-205

Number of Lamps

2

Ballast Factor

The percentage of a lamp's rated lumen output that can be expected when operated on a specific commercially available ballast. For example, a ballast with a ballast factor of 0.93 will result in the lamps emitting 93% of their rated lumen output. A ballast with a lower ballast factor results in less light output and also generally consumes less power.
 
Ballast Factor
88-89%

Ballast Type

Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
 
Ballast Type
Electronic

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
1.8

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
3.13

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
11.75

Power Factor

98-99%

Total Harmonic Distortion (THD)

Total harmonic distortion, or THD, is the measure of how much a ballast can distort the waveform of that building’s power supply and interfere with other equipment. Electronic ballasts today are rated at less than 20 percent, 15 percent, or less than 10 percent THD. The magnetic ballast is rated in the 20 to 28 percent range. The lower the THD the better and more efficient the ballast, and the less likely it is to interfere with other electronic equipment.
 
Total Harmonic Distortion (THD)
<10%

Lamps by Wattage

2x100W, 2x110W, 2x60W, 2x75W, 2x85W, 2x95W

Ballast Lamp Type

The type of bulb the ballast can fire.
 
Ballast Lamp Type
T12
Description
 
Reviews
 
Q & A
SAVE 20 WATTS WITH NEW ELECTRONIC BALLAST FOR OLDER T12 LAMPS. Replace old Magnetic ballast(s) with Universal Basic-12 ELECTRONIC Energy Saving Ballast. Ignites Two F48T12/HO, F60T12/HO, F72T12/HO, F84T12/HO, F96T12/HO/ES, or F96T12/HO Lamps of 120-277 Voltage. LAMPS NOT INCLUDED.

REVIEW SNAPSHOT®

by PowerReviews
Universal120-277 Volt Two Lamp F96T12/HO ELECTRONIC Ballast
 
5.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

 
5.0

replacement ballastt

By tom

From Dillon SC

About Me Casual Do-It-Yourselfer

Verified Buyer

Pros

  • Easy To Install

Cons

    Best Uses

    • Repair or replacement

    Comments about Universal 120-277 Volt Two Lamp F96T12/HO ELECTRONIC Ballast:

    Sales person was very helpful in locating a replacement ballast for lights in my shop. Original ballast were very expensive. I ordered 6 of these and had them installed in no time. And now there is light.......................................Thanks

    • Primary use:
    • Personal

    Displaying review 1

    Back to top

    Do you have questions about this product?

    get answers from real customers and in-house experts with AnswerBox.

    1 Question | 1 Answer
    Displaying question 1
    • Q:

      Does this ballast come with a wiring diagram to replace an old magnetic ballast?
      Asked on 3/1/2012 by Tired of Flickering and Buzzing from Nokesville, VA

      1 answer

      • CUSTOMER CARE

        A:

        The wiring diagram is shown on the ballast label. The manufacturer strongly recommends that a qualified electrician install the ballast.

        Answered on 3/5/2012 by Product Support from Bulbs.com
    Displaying question 1

    Do you have a question about this product? 

     
    BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.