Bulbs.com
243 Stafford St.
Worcester, MA 01603
Tel. 1 (888) 455-2800
Fax 1.508.363.2900
www.bulbs.com
Bulbs Logo

120 Volt Three Lamp F32T8 Electronic Dimming Ballast

SKU: REZ-3S32SC35M | Ordering Code: REZ3S32SC35I

Sorry, this product is not available to purchase.

Product Details

Brand

Advance Transformer

Input Volts

120

Input Watts

7-102

Number of Lamps

3

Ballast Factor

The percentage of a lamp's rated lumen output that can be expected when operated on a specific commercially available ballast. For example, a ballast with a ballast factor of 0.93 will result in the lamps emitting 93% of their rated lumen output. A ballast with a lower ballast factor results in less light output and also generally consumes less power.
 
Ballast Factor
5-105%

Ballast Type

Magnetic ballasts are a legacy technology and use inductance to transform the line voltage to the voltage required to "fire" or excite the gasses in a lamp. Electronic ballasts use a variety of starting methods, and are more efficient than magnetic ballasts in converting input power to the proper lamp power and operate fluorescent lamps at higher frequencies, resulting in an overall lamp-ballast system – increasing efficacy 15% to 20% over a magnetic equivalent.
 
Ballast Type
Electronic

Height (in)

For ballasts and fixtures, height is the measurement of total vertical distance from the top of the product to the bottom expressed in inches.
 
Height (in)
1.2

Width (in)

For fixtures and ballasts, width is the measurement of the total horizontal distance from left to right of the product in inches.
 
Width (in)
1.7

Length (in)

Also referred to as "Maximum Overall Length" (MOL). For light bulbs, it measures the length of a light bulb, from the top of the bulb to the bottom of the base or pins and is typically expressed in inches. For light fixtures and ballasts, it applies to the total horizontal length of the item.
 
Length (in)
9.5

Power Factor

99%

Total Harmonic Distortion (THD)

Total harmonic distortion, or THD, is the measure of how much a ballast can distort the waveform of that building’s power supply and interfere with other equipment. Electronic ballasts today are rated at less than 20 percent, 15 percent, or less than 10 percent THD. The magnetic ballast is rated in the 20 to 28 percent range. The lower the THD the better and more efficient the ballast, and the less likely it is to interfere with other electronic equipment.
 
Total Harmonic Distortion (THD)
10%

Lamps by Wattage

3x17W, 3x24W, 3x25W, 3x31W, 3x32W

Ballast Lamp Type

The type of bulb the ballast can fire.
 
Ballast Lamp Type
T8

Dimming

Dimming ballasts provide dimming capability when used with an appropriate controller and lamp.
 
Dimming
Yes
Description
 
Reviews
 
Q & A
Advance Mark X DIMMING Electronic Ballast of High Power Factor for LINE Voltage Systems. Ignites Three FB017T8, F17T8, FB024T8, F25T8, FB031, FB32T8 or F32T8 Rapid Start Start Lamps of 120 Voltage. LAMPS NOT INCLUDED.
 
BulbFinderNot sure how to find your bulb? Click here for our step-by-step tool.